SMU - Revised Trim Height Specifications
| Subject: | Revised Trim Height Specifications |
| Models: | 2001-2002 Buick Century, Regal |
This bulletin is being issued to revise the Trim Height Specifications in the Suspension General Diagnosis sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.
The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.
Model | Susp. RPO | Tire Size | Style | D (curb) | J (curb) | K (curb) | Z (curb) |
|---|---|---|---|---|---|---|---|
Century/Regal 3.1L (LG8) | FE1 | P205/70R-15 | 4 door | 273 mm (10.75 in) | 218 mm (8.58 in) | 223 mm (8.78 in) | 45 mm (1.77 in) |
Regal 3.8L (L36/L67) | FE3 | P215/70R-15 P225/60R-16 | 4 door | 267 mm (10.51 in) | 223 mm (8.78 in) | 225 mm (8.86 in) | 45 mm (1.77 in) |
* The D height (represented as 1 in the figure) is measured from a point 30 mm outboard of the rear brake hose bracket bolt centerline to the bolt centerline of the trailing arm to the knuckle attachment. ** The Z height is measured in line with the wheel center:
| |||||||
Measuring Z Height
Measuring D Height
Measuring J or K Height
