GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2005 🢒 Century 🢒 Vehicle Control Systems 🢒 Computer/Integrating Systems 🢒 Electronic Traction Control Switch Replacement

Removal Procedure

    Object Number: 629741 Size: SH
  1. Depress the retainers on each side of the traction control/heated seat switch using a small flat-bladed tool.
  2. Lift the traction control/heated seat switch from the front of the floor console trim plate.
  3. Disconnect the electrical connector from the traction control switch.
  4. Disconnect the electrical connectors from the heater seat switches.

Installation Procedure

    Object Number: 629741 Size: SH
  1. Connect the electrical connector to the traction control switch.
  2. Connect the electrical connectors to the heater seat switches.
  3. Position the traction control/heated seat switch to the front floor console trim plate.
  4. Install the traction control/heated seat switch into the console trim plate pressing in until the retainers are fully seated.