Schematic Reference: Retained Accessory Power (RAP) Schematics

Connector End View Reference: Computer/Integrating Systems Connector End Views

Did you perform the Diagnostic System Check - Vehicle?

Go to Step 2

Go to Diagnostic System Check - Vehicle in Vehicle DTC Information

1. Turn the ignition switch to the LOCK position.
2. Disconnect the retained accessory power (RAP) relay.
3. Inspect the power windows, radio and the sunroof for correct operation.

Do the sunroof and the power windows operate?

Go to Step 3

Go to Step 4

Test for a short to battery in the power windows, radio and sunroof supply voltage circuit. Refer to Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 5

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Replace the RAP relay.

Did you complete the repair?

Go to Step 5

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 2