LOOSE DOOR WINDOW SWITCH PLATE REPAIR PROCEDURE

MODELS AFFECTED: ALL 1985 "C" STYLES

NOTICE: This bulletin supersedes 85-9-7A, dated March, 1985. Change made in recommended materials.

If a condition is encountered where the door window switch plate escutcheon comes loose from the switch plate base, it may be repaired as follows:

1. Using 3M-8984, or equivalent solvent, thoroughly clean cementing surfaces.

2. Using 3M-8101 structural adhesive, Loctite Quick Jel (SGGA) or equivalents, recement escutcheon to switch plate base. Follow manufacturer's label directions for bonding.

WARRANTY INFORMATION

Labor Operation Number: T0131 Failure Code: 92 Labor Hours: 0.3 per door

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.