For 1990-2009 cars only
- Loosen the adjuster cam nut (1).
- Using a wrench to rotate the adjuster bolt (2), adjust the cam (3) to specifications.
- Using a wrench to hold the adjuster bolt (2), tighten the adjuster nut (1).
- Check the toe alignment and adjust if required. Refer to Rear Toe Adjustment.
- Test drive the vehicle.
Caution: Refer to Fastener Caution in the Preface section.
Note: Ensure that the camber settings have not changed after torquing the adjuster nut to specifications. Readjust if necessary.
Tighten
Tighten the nut to 140 N·m (103 lb ft).
