Preliminary Procedure

Remove the liftgate applique. Refer to Liftgate Applique Replacement.

1

Double Ended Stud with Collar (Qty: 2)

Tip
Remove in order to remove the isolator from the applique.

2

Liftgate Applique Isolator

Tip
Carefully release the isolator tab from the liftgate applique.

3

Rearview Camera

Procedure

1. Disengage the electrical harness from above the rear latch clips.
2. Disconnect the camera electrical harness connector from the rear license plate lamp harness electrical connector.
3. Ensure the electrical harness is properly positioned prior to installation of the liftgate applique isolator.

Preliminary Procedure

Remove the liftgate outside handle. Refer to Liftgate Outside Handle Replacement.

1

Rearview Camera Screw (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2.5 N·m (22 lb in)

2

Rearview Camera

Tip
Release tape to remove the wiring harness.