For 1990-2009 cars only
Removal Procedure
- Pull rearward on the rear console panel in order to disengage the retainers.
- Remove the vent grilles from the rear trim panel by pulling outward. This is to allow for access to the rear vent on/off control linkage on installation.
Remove the rear trim panel.
Installation Procedure
- Align the rear console trim panel to the console.
- Through the vent grille openings fasten the rear vent on/off control linkage to the control knob.
- Install the vent grilles.
Push inward in order to engage the retainers.
