Important: The following steps must be completed before
using the symptom tables.
- Perform the 
Diagnostic System Check - Vehicle 
 in Vehicle DTC Information before using the Symptom Tables in order to
verify that all of the following are true:
 
| •  | The control module(s) can communicate via the serial data link. | 
 
- Review the theft systems description and operation in order to familiarize
yourself with the system functions. Refer to the following:
 
Visual/Physical Inspection
|     •  | Inspect the easily accessible or visible system components for obvious
damage or conditions which could cause the symptom. | 
 
|     •  | Inspect the ignition key for PK3 stamped on the shank. | 
 
|     •  | Inspect the PASS-Key III® key head for damage. | 
 
Intermittent
Faulty electrical connections or wiring may be the cause of intermittent conditions.
Refer to 
Testing for Intermittent Conditions and Poor Connections 
 in Wiring Systems.
Symptom List
Refer to a symptom diagnostic procedure from the following list in order to
diagnose the symptom: