For 1990-2009 cars only
- Open the trunk. See Trunk for more information.
- Turn the screws located just inside of the trunk counterclockwise and remove them.
- Remove the plastic trim piece from the trunk.
- Pull the carpet away from the rear area to access the turn signal bulb assembly.
- Loosen and remove the bolts that hold the lamp assembly in place.
- Pull out the lamp assembly.
- Turn the bulb socket one-quarter turn counterclockwise, while pressing it firmly.
- Pull the bulb socket straight out of the assembly.
- Remove the old bulb by pulling it straight out.
- Replace with a new bulb by pushing the bulb straight into the socket until the bulb clicks into place.
- Turn the bulb socket one-quarter turn into the assembly to lock it back into place.
- Reverse Steps 1 through 5 to reinstall the lamp assembly.
