Step | Action | Yes | No | ||||||
|---|---|---|---|---|---|---|---|---|---|
Schematic Reference: Exterior Lights Schematics Connector End View Reference: Lighting Systems Connector End Views | |||||||||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | |||||||
2 | Verify that the marker lamps are inoperative. Do the marker lamps operate normally? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 | ||||||
3 | Place the headlamp switch in the PARK position. Do the park lamps operate normally? | Go to Step 4 | |||||||
4 | Inspect the inoperative bulb and socket for an open filament or poor terminal connections. Does any lamp have an open filament or poor terminal connections? | Go to Step 6 | Go to Step 5 | ||||||
5 | Repair the open or high resistance in one of the following circuits. Refer to Wiring Repairs :
Did you complete the repair? | Go to Step 7 | -- | ||||||
6 | Replace the defective bulb or repair/replace the socket. Refer to Wiring Repairs . Did you complete the repair? | Go to Step 7 | -- | ||||||
7 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 | ||||||
