For 1990-2009 cars only
Removal Procedure
- Disconnect the electrical connector (1) from the ambient temperature sensor (3) that is located on the right front radiator air baffle.
- Remove the push-in retainer (2) from the ambient temperature sensor.
- Remove the ambient temperature sensor (3) from the radiator air baffle.
Installation Procedure
- Align the ambient temperature sensor (3) to the radiator air baffle.
- Install the push-in retainer (2) to the ambient temperature sensor.
- Connect the electrical connector (1) to the ambient temperature sensor.
- Drive the vehicle at a speed of 32 km/h (20 mph) for approximately one and a half minutes or at a speed of 72 km/h (45 mph) for approximately one minute in order to obtain the ambient update.
