GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2003 🢒 Rendezvous - FWD 🢒 Suspension 🢒 Automatic Level Control 🢒 Inflator Solenoid Replacement

Removal Procedure

    Object Number: 865401 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the hoses (1) from the inflator solenoid.
  3. Remove the electrical connector (2) from the inflator solenoid.
  4. Remove the screws (3) from the inflator solenoid to the air compressor assembly bracket.
  5. Remove the inflator solenoid from the air compressor bracket.

Installation Procedure

    Object Number: 865401 Size: SH
  1. Install the inflator solenoid to the air compressor assembly bracket.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the screws (3) into the inflator solenoid and the air compressor bracket.

    3. Tighten
    Tighten the screws to 6 N·m (53 lb in).

  3. Install the electrical connector (2) onto the inflator solenoid.
  4. Install the hoses (1) onto the inflator solenoid.
  5. Lower the vehicle.