GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 1999 🢒 Riviera 🢒 Transmission/Transaxle 🢒 Automatic Transaxle - 4T65-E 🢒 Range Selector Lever Cable Replacement

Removal Procedure

    Object Number: 98413 Size: SH
  1. Disconnect the cable from the transmission manual shaft lever and the bracket on the transmission.
  2. Remove the shift handle.
  3. Remove the console trim and the console, as necessary.
  4. Remove the cable retaining clips and the cable at the console.
  5. Remove the left sound insulator.

    6. Object Number: 98412 Size: SH
  6. Pull back the carpet in order to expose the cable.

    7. Object Number: 98414 Size: SH
  7. Remove the shift control cable assembly through the hole in the cowl.

Installation Procedure

    Object Number: 98412 Size: SH
  1. Properly route the shift control cable. Position the cable.
  2. Install the carpet into position.
  3. Install the left sound insulator.
  4. Install the cable at the console and the retaining clip.
  5. Install the console and the console trim, as removed.
  6. Install the shift handle.

    7. Object Number: 98413 Size: SH
  7. Install the cable to the transmission manual shaft lever and bracket.
  8. Adjust the cable. Refer to Range Selector Lever Cable Adjustment .