Step  | Action  | Value(s)  | Yes  | No  | 
|---|---|---|---|---|
DEFINITION: This table diagnoses inoperative fog lamp indicator. It assumes that the fog lamps operate properly.  | ||||
1  | Did you perform the entire Fog Lights System Check?  | --  | Got to Step 2  | Go to Fog Lights System Check  | 
2  | With the fog lamps on, backprobe with a DMM from the fog lamp switch connector cavity 5 (YEL) to ground. Is the voltage within the specified range?  | 10-15V  | Got to Step 3  | Got to Step 4  | 
3  | Backprobe with a DMM from the fog lamp switch connector cavity 5 (YEL) to cavity 6 (BLK). Is the voltage within the specified range?  | 10-15V  | Got to Step 6  | Got to Step 5  | 
4  | Repair the open in CKT 317 (YEL) between the fog lamp switch and S124. Refer to Wiring Repairs in Wiring Systems. Is the repair complete?  | --  | Go to Fog Lights System Check  | --  | 
5  | Repair the open in CKT 150 (BLK) between the fog lamp switch and S298. Refer to Wiring Repairs in Wiring Systems. Is the repair complete?  | --  | Go to Fog Lights System Check  | --  | 
6  | Replace the fog lamp switch. Is the repair complete?  | --  | Go to Fog Lights System Check  | --  |