Step  | Action  | Value(s)  | Yes  | No  | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1  | Did you perform the Vehicle Theft Deterrent (VTD) System Check?  | --  | Go to Step 2  | |||||||||||||||||||
2  | Try to start the engine. Does the engine crank?  | --  | Go to Step 5  | Go to Step 3  | ||||||||||||||||||
3  | Inspect the following theft deterrent module connector terminals for proper connections. Refer to Intermittents and Poor Connections Diagnosis in Wiring Systems. 
 
 
 
 
 Are the contacts OK?  | --  | Go to Step 4  | Go to Step 15  | ||||||||||||||||||
4  | 
 
 
 
 
 
 
 
 
 Are the circuits OK?  | --  | Go to Step 10  | Go to Step 14  | ||||||||||||||||||
5  | 
 Does the voltage measure within the specified range?  | 10-15 V  | Go to Step 7  | Go to Step 6  | ||||||||||||||||||
6  | Observe one of the following indicators: 
 
 Do the indicators turn on?  | --  | Go to Step 11  | Go to Instrument Cluster System Check in Instrument Panel, Gauges and Console  | ||||||||||||||||||
7  | Connect a fused jumper from the theft deterrent module harness connector terminal A5 to ground. Does the security indicator turn on?  | --  | Go to Step 9  | Go to Step 8  | ||||||||||||||||||
8  | Repair the short to battery in CKT 264. Refer to Wiring Repairs in Wiring Systems. Is the repair complete?  | --  | --  | |||||||||||||||||||
9  | Inspect the theft deterrent module connector terminal A5 for proper connection. Refer to Intermittents and Poor Connections Diagnosis in Wiring Systems. Is the contact OK?  | --  | Go to Step 10  | --  | ||||||||||||||||||
10  | Replace the theft deterrent module. Refer to Theft Deterrent Module Replacement Is the repair complete?  | --  | --  | |||||||||||||||||||
11  | Inspect the Instrument Panel fuse. Is the fuse OK?  | --  | Go to Step 12  | --  | ||||||||||||||||||
12  | 
 
 Are the circuits OK?  | --  | Go to Step 13  | Go to Step 14  | ||||||||||||||||||
13  | 
 
 
 
 Are the connectors OK?  | --  | --  | |||||||||||||||||||
14  | Repair the suspect circuit. Refer to Wiring Repairs in Wiring Systems. Is the repair complete?  | --  | --  | |||||||||||||||||||
15  | Repair the terminal contact. Refer to Repairing Connector Terminals in Wiring Systems. Is the repair complete?  | --  | --  |