Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Remove the seat belt retractor trim cover. Refer to Rear Seat Belt Retractor Trim Cover Replacement .

1

Inflator Solenoid Fill Valve Nut

Tighten
3 N·m (27 lb in)

2

Inflator Solenoid Nut

Tip

1. Access the solenoid through the seat belt trim cover opening.
2. Disconnect the inflator solenoid electrical connector.
3. Disconnect the inflator solenoid air lines from the solenoid.

Tighten
3 N·m (27 lb in)

3

Inflator Solenoid

Tip
Remove the inflator solenoid from the rear quarter trim panel.