Removal Procedure
- Remove the negative battery cable.
 
- Raise the vehicle. Refer to 
Lifting and Jacking the Vehicle
 in General Information.
 
- Remove the oil pan drain plug.
 
- Remove the oil filter.
 
Installation Procedure
- Lubricate the oil filter gasket with clean engine oil and install the oil filter.
 
Tighten the filter to one turn after
gasket contact.
Notice: Refer to Fastener Notice in the Preface section.
- Install the oil pan drain bolt.
 
Tighten
Tighten the oil pan drain bolt to 26 N·m (19 lb ft).
- Lower the vehicle.
 
- Fill the engine with oil to the appropriate mark.
 
- Start engine and inspect for leaks.