Removal Procedure
- Position your fingers
between the headliner and the information center telltale assembly bezel and
gently pull down to release the display bezel retainers.
 
- Use a small flat-bladed
tool to release the locking tab at the rear of the telltale assembly.
 
- Tilt the information center
telltale assembly down and pull down to remove.
 
- Disconnect the electrical connector from the information center
telltale assembly.
 
Installation Procedure
- Connect the electrical
connector to the information center telltale assembly.
 
- Position the information center telltale assembly into the headliner
until locking tab locks into position. It may be necessary to rock the display
into position.
 
- Install bezel by pressing into place until the locking tabs are
fully seated.