Tools Required
• | J 28467-B
Universal Engine Support Fixture |
Installation Procedure
- Loosely install the J 28467-501
(1) to the ends of the strut tower tube J 28467-3 (2).
- Place the strut tower tube J 28467-3 and
the J 28467-501
on top
of both the left and right fender lips, over the engine rear lift bracket.
- Install the radiator shelf tube J 28467-2A (2)
on top of the strut tower tube J 28467-3 (1) over the engine
front lift bracket.
- Install the round tube
of the front support assembly J 28467-4A through the large hole in
the radiator shelf tube J 28467-2A. The hole used in the
radiator shelf tube J 28467-2A depends on the vehicle
application.
- Place the rubber padded foot of the front support assembly J 28467-4A
on the upper tie bar.
- Install the 7/16 in x 2.0 in quick release pin J 28467-9
through the hole in the front support assembly J 28467-4A in order
to level the radiator shelf tube J 28467-2A.
- Install the cross bracket
assembly J 28467-1A.
- Hand tighten the cross bracket assembly J 28467-1A wing
nuts.
- Install the lift hook
J 28467-7A through the lift hook bracket J 28467-6A.
- Install the 1/2 in lift hook washer and lift hook wing
nut J 28467-34 onto the lift hook J 28467-7A.
- Install the assembled
lift hook bracket J 28467-6A (1) over the strut tower tube
J 28467-3 (2).
- Adjust the assembled lift hook bracket J 28467-6A (1)
in order to align the hook with the engine rear lift bracket.
- Install the lift hook J 28467-7A through
the engine rear lift bracket. Ensure the hook does not damage the surrounding
components.
- Repeat steps 9 and 10.
- Install the assembled
lift hook bracket J 28467-6A (1) over the radiator shelf tube
J 28467-2A (2).
- Adjust the assembled lift hook bracket J 28467-6A (1)
in order to align the hook with the engine front lift bracket.
- Install the lift hook J 28467-7A through
the engine front lift bracket. Ensure the hook does not
damage the surrounding components.
- Hand tighten the lift hook wing nuts J 28467-34
securely to remove all slack from the engine support fixture assembly.
Removal Procedure
- Remove the J 28467-B
.
- Remove the J 28467-501
.