Extension Disassemble Y Car

Tools Required

1. Remove the reverse idler shaft bracket bolts.
2. Remove the bracket.



3. Remove the following parts in order:

3.1.	The reverse idler gear

3.2.	The roller bearing

3.3.	The reverse idler shaft




4. Remove the following parts in order:

4.1.	The countershaft extension bearing race

4.2.

The shim

4.3.	The funnel

4.4.	Remove the outer and inner output shaft seals (pry out the seals with a suitable tool).




5. Remove the mainshaft bearing race retainer ring.

Important: Do not replace the bearing race unless inspection shows bearing race damage.

6. Remove the mainshaft bearing race using the J 26941 and the J 23907 .

Extension Disassemble CTSV

Tools Required

1. Remove the reverse idler shaft bracket bolts.



2. Remove the reverse idler gear, the roller bearing, and the reverse idler shaft.



3. Remove the countershaft extension bearing race, the shim, and the funnel.



4. Remove the output shaft seal.

Pry out the seal with a suitable tool.




5. Remove the mainshaft bearing race retainer ring.

Important: Do not replace the bearing race unless inspection shows bearing race damage.

6. Remove the mainshaft bearing race using J 26941 and J 23907 .