Tools Required

J 39694 Spring Compressor

1. Remove the spiral snap ring (519). Discard the snap ring, which is not reusable.
2. Remove the following parts:

•	The sprag clutch retainer (518)

•	The second sprag outer race

•	The second sprag clutch (516-517)

•	The second sprag outer race thrust washer (520)




3. Remove the following parts:

•	The reverse clutch snap ring (515)

•	The reverse clutch backing plate (512)

•	All of the fiber (513) and steel (511) clutch plates

•	The reverse clutch waved plate (514)




4. Install the J 39694 spring compressor and compress the spring and retainer assembly (509). Then remove the snap ring (510).



5. Remove the following parts:

•	The snap ring retainer (509)

•	The spring and retainer assembly (508)

•	The piston assembly (505)