For 1990-2009 cars only
Removal Procedure
- Remove the shift control knob. Refer to Transmission Control Lever Knob Replacement .
- Remove the shift control trim plate by lifting the rear of the trim plate up then pull the plate rearward in order to disengage the front retaining tabs.
- Disconnect the electrical connectors from the shift control trim plate.
- Remove the center console assembly. Refer to Front Floor Console Replacement in Instrument Panel, Gages, and Console
- Remove the shift indicator lamp sockets (1 and 2) from the shift indicator by rotating the lamp sockets one quarter turn.
- Carefully spread the retaining tabs (3) enough to lift the back of the shift indicator (2) up past the retaining tabs (3).
- Carefully lift upward on the front of the shift indicator (2) in order to release the front retaining tabs (1)
- Remove the shift indicator (2) from the shift control assembly.
Installation Procedure
- Lower the shift indicator (2) over the shift control shaft.
- Align the front retaining tabs (1) with the holes in the shift control assembly.
- Press down on the front of the shift indicator to engage the retaining tabs (1).
- Align the rear retaining tabs (3) with the sides of the shift control assembly.
- Press down on the rear of the shift indicator to engage the retaining tabs (3).
- Install the shift indicator lamp sockets (1 and 2) to the shift indicator. Rotate each lamp socket one quarter turn to lock in place.
- Install the center console assembly. Refer to Front Floor Console Replacement in Instrument Panel, Gages, and Console
- Install the shift control trim plate by inserting the front retaining tabs to the console. Then press down on the rear of the trim plate to engage the rear retaining tabs.
- Install the shift control knob. Refer to Transmission Control Lever Knob Replacement .
