Special Tools
EN 48898 Supercharger Lift Fixture
For equivalent regional tools, refer to
Special Tools
Note:
• | The supercharger, throttle body, fuel injection rail and fuel injectors may be removed as an assembly. If not servicing the individual components, remove the supercharger as an assembly. |
• | Cover the inlet area of the supercharger (1) to prevent dirt or debris contamination onto the rotors. |
- Remove the positive crankcase ventilation (PCV) - dirty air hose (1) from the valley cover and supercharger.
- Remove the supercharger cover bolts (1) and the
supercharger cover (2).
- Remove the supercharger cover seal (3).
- Remove the charge air cooler insulator (1).
- Cover the supercharger rotors area (1) to prevent dirt or debris contamination
onto the rotors.
- Remove the supercharger bolts (1).
- Install the
EN 48898 fixture
to the supercharger (1) and tighten the
EN 48898 fixture
studs and nuts until snug.
- Using a lifting device, remove the supercharger from the engine.