Preliminary Procedures

1. Open and support the hood.
2. Remove the front compartment side sight shield on the passenger side of the engine compartment.
3. Place a clean suitable container under the vehicle to contain any windshield washer fluid loss when the washer hoses are disconnected.
4. Disconnect the 2 electrical connectors at the windshield washer solvent heater assembly.

1

Windshield Washer Solvent Heater Bracket Nut (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
9 N·m (80 lb in)

2

Windshield Washer Solvent Heater Assembly

3

Windshield Washer Solvent Hose

Tip
Disconnect the hose and the windshield washer pump hose connection just below the windshield washer hose.