GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 1998 🢒 Catera 🢒 Steering 🢒 Steering Wheel and Column - Tilt 🢒 Ignition Lock Cylinder Replacement - On Vehicle

Removal Procedure
  1. Remove the inflatable restraint steering wheel module coil. Refer to Steering Wheel Inflator Module Coil Replacement

    2. Object Number: 210369 Size: SH
  2. Insert a small pointed awl or wire into the ignition lock cylinder release pin hole.
  3. Pull out the ignition lock cylinder.

Installation Procedure

    Object Number: 210472 Size: SH
  1. Install the lock cylinder:
    2. • Look into the hole that receives the lock cylinder on the lower RH side in order to locate the locking lever.
    • Carefully push down on the locking lever using a small flat-bladed tool untill an audible click is heard.
    • Install the lock cylinder.
  2. Install the inflatable restraint steering wheel module coil. Refer to Steering Wheel Inflator Module Coil Replacement