Name | Location | Locator View | Connector End View |
|---|---|---|---|
A/C Compressor Clutch Coil | Attached to the LH front of the engine block, part of the A/C compressor | -- | HVAC Connector End Views in HVAC Systems |
A/C Compressor Diode | At the A/C compressor clutch coil connector | -- | -- |
A/C Compressor Refrigerant Pressure Switch | LH front of the engine compartment, mounted in the A/C compressor/condenser hose, below the A/C load switch | Cooling System Component Views in Engine Cooling | Cooling System Connector End Views in Engine Cooling |
A/C Compressor Relay K60 | LH front of the engine compartment, in the ECM housing | -- | HVAC Connector End Views in HVAC Systems |
A/C Load Switch | LH front of the engine compartment, mounted in the A/C compressor/condenser hose | Cooling System Component Views in Engine Cooling | HVAC Connector End Views in HVAC Systems |
Accelerator Pedal Position (APP) Sensor (1 & 2) | Top of the accelerator pedal assembly | -- | |
Camshaft Position (CMP) Sensor | Upper front of engine block LH | ||
Coolant Fan Test Connector | LH front of the engine compartment, in the ECM housing | -- | Cooling System Connector End Views in Engine Cooling |
Crankshaft Position (CKP) Sensor | LH rear of the engine block | ||
Cruise Control Switch | LH side of the steering column, part of multifunction lever | -- | Cruise Control Connector End Views in Cruise Control |
Cruise Control Release Switch | Attached to the brake pedal bracket, above the stoplamp switch | -- | Cruise Control Connector End Views in Cruise Control |
Data Link Connector (DLC) | Attached to the I/P carrier, to the left of the steering column | -- | Data Link Communications Connector End Views in Data Link Communications |
ECM Housing | LH front of engine compartment | -- | |
Electronic Brake/Traction Control Module (EBTCM) | LH front of the engine compartment, mounted to the lower rail | Antilock Brake System Component Views in Antilock Brakes | Antilock Brake System Connector End Views in Antilock Brakes |
Engine Controls Power Relay K43 | LH front of the engine compartment, in the ECM housing | -- | |
Engine Control Module (ECM) | LH front of the engine compartment, in the ECM housing | ||
Engine Coolant Temperature (ECT) Sensor | Mounted on coolant bridge rear of engine near fuel injector harness connector | ||
Evaporative (EVAP) Purge Solenoid Valve | RH rear of the intake manifold plenum | ||
Evaporative (EVAP) Tank Solenoid Valve | Front of fuel tank, attached to body frame | -- | |
Fuel Injectors (Sequential Multiport) #1 through #6 | On top of engine, along each side of the intake manifold | ||
Fuel Pump | Underneath the rear of the vehicle, inside the fuel tank | -- | |
Fuel Pump Relay K44 | LH front of the engine compartment, in the ECM housing | -- | |
Fuel Tank Pressure Sensor | Mounted on top of fuel tank | -- | |
Fuse Block | Mounted to the I/P, lower LH side of steering column | -- | -- |
Gauge Cluster | LH side of the I/P, just to the left and above the heater and A/C control | -- | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges and Console |
Heated Oxygen Sensor (HO2S Bank 1 Position 1) | Located on the RH front side of the exhaust catalytic converter | -- | |
Heated Oxygen Sensor (HO2S Bank 1 Position 2) | Located on the RH rear side of the exhaust catalytic converter | -- | |
Heated Oxygen Sensor (HO2S Bank 2 Position 1) | Located on the LH front side of the exhaust catalytic converter | -- | |
Heated Oxygen Sensor (HO2S Bank 2 Position 2) | Located on the LH rear side of the exhaust catalytic converter | -- | |
Heater and A/C Control | Center of I/P, above the radio | Instrument Panel, Gages, and Console Component Views in Instrument Panel, Gauges and Console | HVAC Connector End Views in HVAC Systems |
Intake Air Temp (IAT) Sensor | IAT sensor is part of the MAF sensor, reference MAF sensor connector end view for IAT sensor pinout information | ||
Ignition Coil (1, 3, 5) | Mounted next to the RH camshaft cover | -- | |
Ignition Coil (2, 4, 6) | Mounted next to the LH camshaft cover | -- | |
Ignition Switch | Mounted on the upper RH side of the steering column | -- | Engine Electrical Connector End Views in Engine Electrical |
Instrument Cluster | LH side of the I/P, above the steering column | -- | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges and Console |
Intake Plenum Switch-Over Solenoid Valve | LH rear of the engine | ||
Intake Resonance Switch-Over Solenoid Valve | Attached to the rear of the resonance chamber | ||
Knock Sensor (KS Bank 1) | RH side of the engine block | ||
Knock Sensor (KS Bank 2) | LH side of the engine block | Engine Controls Component Views | |
Mass Air Flow (MAF) Sensor | In the air intake passage, between the air cleaner and the resonance chamber | ||
Power Distribution Fuse Block | LH front of the engine compartment, attached to the ECM housing, above the battery | -- | -- |
Secondary Air Injection Pump | Attached to the LH front rail, under the wheelhouse | -- | |
Secondary Air Injection Pump Relay K12 | LH front of the engine compartment, in the ECM housing | -- | |
Secondary Air Injection Pump Solenoid Valve | Front center of engine compartment, beneath secondary air injection switch-over valve | -- | |
Spark Plugs | Top of the engine | -- | -- |
Stop Lamp Switch | Attached to the brake pedal bracket, below the cruise control release switch | -- | Lighting Systems Connector End Views in Lighting Systems |
Theft Deterrent Module | Mounted to the ignition lock cylinder on the upper RH side of the steering column | -- | Theft Deterrent System Connector End Views in Theft Deterrent |
Throttle Position (TP) Sensor (1 & 2) | Attached to the throttle body | ||
Transmission Control Module (TCM) | Behind the RH side of the I/P | -- | Automatic Transmission Inline Harness Connector End View in Automatic Transmission |
Throttle Valve Motor | Integral part of TP sensor, reference TP sensor connector end view for throttle valve motor pinout information | -- | |
C101 | I/P wiring harness to ECM wiring harness, in the LH front of the engine compartment | -- | Inline Harness Connector End Views in Wiring Systems |
C105 (white connector) | I/P wiring harness to ECM wiring harness, located at LH front of the engine compartment, just behind the battery | Wiper/Washer Component Views in Wiper/Washer System | Inline Harness Connector End Views in Wiring Systems |
C106 (blue connector) | I/P wiring harness to ECM wiring harness, located at LH front of the engine compartment, just behind the battery | Wiper/Washer Component Views in Wiper/Washer System | Inline Harness Connector End Views in Wiring Systems |
C110 | ECM wiring harness to A/C control wiring harness, in the ECM housing | -- | Inline Harness Connector End Views in Wiring Systems |
C112 | ECM wiring harness to fuel injector wiring harness, at the LH rear of the bank 2 cylinder head. | -- | Inline Harness Connector End Views in Wiring Systems |
C200A | I/P wiring harness to body wiring harness, at lower LH A-pillar | Power and Grounding Component Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C200B | I/P wiring harness to body wiring harness, at lower LH A-pillar | Power and Grounding Component Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C400 | Body wiring harness to fuel sender wiring harness, beneath the vehicle, near the front of the fuel tank | -- | Inline Harness Connector End Views in Wiring Systems |
C402 | Body wiring harness to fuel sender wiring harness, beneath the vehicle, near the front of the fuel tank | -- | -- |
G101 | ECM wiring harness, attached to the negative battery cable terminal | -- | -- |
G102 | ECM wiring harness, attached to the negative battery cable terminal | -- | -- |
G103 | Body and I/P wiring harnesses, located at the LH front of the engine compartment, near C102, C105, and C106 | Wiper/Washer Component Views in Wiper/Washer System | -- |
G400 | Body wiring harness, located in the lower LH corner of the rear compartment, near the LH stop/tail lamp | -- | -- |
P103 | Lower LH A-pillar, forward of G200 | Power and Grounding Component Views in Wiring Systems | -- |
P104 | LH engine compartment, at the front of the ECM housing | -- | -- |
P106 | RH rear of the engine compartment | -- | -- |
P108 | In the LH engine compartment, at the rear of the ECM housing | -- | -- |
P110 | Rear LH corner of the engine compartment | -- | -- |
P400 | Approximately 30 cm from the RH rear wheel speed sensor | -- | -- |
S103 | Body wiring harness, approximately 15 cm (6 in) from branch break off for the LH headlamp, towards the EBTCM branch break off | -- | -- |
S104 | Body wiring harness, approximately 71 cm (28 in) from P103, towards the EBTCM branch break off | -- | -- |
S106 | Body wiring harness, approximately 38 cm (15 in) from P103, towards the EBTCM branch break off | -- | -- |
S109 | A/C control wiring harness, located between branch break off for the cooling fan resistor and branch break off for connectors C101 and C111 | -- | -- |
S110 | A/C control wiring harness, located between branch break off for the cooling fan resistor and branch break off for connectors C101 and C111 | -- | -- |
S120 | ECM wiring harness, inside the ECM housing, approximately 7 cm (3 in) from P108, located under ECM connector C1 plastic cover | -- | -- |
S121 | ECM wiring harness, inside the ECM housing, approximately 4 cm (2 in) from P108 | -- | -- |
S123 | ECM wiring harness, inside the ECM housing, approximately 13 cm (5 in) from P108 | -- | -- |
S124 | ECM wiring harness, inside the ECM housing, approximately 17 cm (7 in) from P108 | -- | -- |
S127 | ECM wiring harness, inside the ECM housing, approximately 3 cm (1 in) from P108 | -- | -- |
S128 | ECM wiring harness, inside the ECM housing, approximately 15 cm (6 in) from P108, in the oxygen sensor fuse branch | -- | -- |
S129 | I/P wiring harness, approximately 34 cm (13 in) from cruise release switch and stoplamp switch branch break off, towards G201 branch break off | -- | -- |
S130 | ECM wiring harness, inside the ECM housing, approximately 19 cm (7 in) from P108, in the oxygen sensor fuse branch | -- | -- |
S131 | ECM wiring harness, inside the ECM housing, approximately 8 cm (3 in) from P108, in the oxygen sensor fuse branch | -- | -- |
S132 | ECM wiring harness, inside the ECM housing, approximately 10 cm (4 in) from P108 | -- | -- |
S150 | Fuel injector wiring harness, near the C112 branch break off | -- | -- |
S160 | A/C control wiring harness, located between branch break off for G104 and branch break off for secondary air injection relay K12 | -- | -- |
S200 | I/P wiring harness, approximately 15 cm (6 in) from cruise release switch and stoplamp switch branch break off, towards G201 branch break off | -- | -- |
S204 | I/P wiring harness, approximately 11 cm (4 in) from P110, towards connector C200 branch break off | -- | -- |
S206 | I/P wiring harness, approximately 22 cm (9 in) from P110, towards connector C200 branch break off | -- | -- |
S208 | I/P wiring harness, in stop lamp switch branch break off | -- | -- |
S214 | I/P wiring harness, approximately 17 cm (7 in) from cruise release switch and stoplamp switch branch break off, towards G201 branch break off | -- | -- |
S228 | I/P wiring harness, approximately 12 cm (5 in) from cruise release switch and stoplamp switch branch break off, towards G201 branch break off | -- | -- |
S229 | I/P wiring harness mounted in harness channel behind LH side of heater and A/C control unit, approximately 25 cm (10 in) from cruise release switch and stoplamp switch branch break off | -- | -- |
S246 | I/P wiring harness, approximately 8 cm (3 in) from cruise release switch and stoplamp switch branch break off, towards G201 branch break off | -- | -- |
S253 | I/P wiring harness, approximately 28 cm (11 in) from cruise release switch and stoplamp switch branch break off, towards G201 branch break off | -- | -- |
