Tools Required
| • | J 33013-B Hub
And Drive Plate Remover And Installer |
| • | J 34992 Compressor
Holding Fixture |
- Clamp the J 34992
in a vise.
- Attach the compressor to the holding fixture using the thumb
screws.
- Use the J 33027-A
to prevent the clutch hub and drive plate assembly from turning.
- Use the J 33022
to remove the shaft nut.
- Thread the J 33013-B
into the hub.
- Use a wrench to hold the body of the J 33013-B
.
- Turn the center screw into the body of the J 33013-B
to remove the clutch plate and hub
assembly.
- Remove the shaft key. Retain the shaft key for reassembly.
