Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Lighting Systems Diagnostic System Check? | -- | Go to Step 2 | |
2 |
Does the fog lamps switch operate properly? | -- | Go to Step 3 | Go to Step 7 |
3 | Remove the fog lamp relay from the underhood relay center. Do the fog lamps turn off? | -- | Go to Step 4 | Go to Step 10 |
4 |
Are the fog lamps on? | -- | Go to Step 5 | Go to Step 6 |
5 | Inspect CKT 1317 (DK GRN/WHT) for a short to ground. Refer to Testing for Short to Ground in Wiring Systems. Is CKT 1317 OK? | -- | Go to Step 12 | Go to Step 13 |
6 | Replace the body control module (PZM). Refer to Body Control Module Replacement in Body Control Systems. Is the body control module replacement complete? | -- | Go to Step 14 | -- |
7 | Disconnect the headlamp switch connector C1. Do the fog lamps turn off? | -- | Go to Step 8 | Go to Step 9 |
8 | Replace the headlamp switch. Refer to Headlamp Switch Replacement in Lighting Systems. Is the headlamp switch replacement complete? | -- | Go to Step 14 | -- |
9 | Inspect CKT 192 (ORN) for a short to ground. Refer to Testing for Short to Ground in Wiring Systems. Is CKT 192 OK? | -- | Go to Step 11 | Go to Step 13 |
10 | Repair the short to voltage in CKT 34 (PPL). Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 14 | -- |
11 | Replace the instrument cluster (IPC). Refer to Instrument Cluster Replacement in Instrument Panel, Gauges and Console. Is the IPC replacement complete? | -- | Go to Step 14 | -- |
12 | Replace the fog lamp relay. Is the repair complete? | -- | Go to Step 14 | -- |
13 | Repair the suspect wiring. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 14 | -- |
14 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK. | Go to Step 2 |
