1

Rear Seat Track Finish Cover

2

Rear Seat Track Finish Cover Retainer Clip (Qty: 3)

Preliminary Procedure

1. Turn the ignition switch to the off/lock position, remove the ignition key and secure in technicians pocket until procedure is complete.
2. Flip and fold the rear seat forward.

1

Rear Seat Frame Outer Finish Cover

Procedure

Pull upward to disengage the retainer clips.

2

Rear Seat Riser Finish Cover

Procedure

1. For reinstallation use the 3 locators to align part properly.
2. Engage upper and lower front clips to the back edge of rear seat frame front finish cover. To finish installation process move rearward along the cover. Part is properly installed when all edges are aligned with rear seat frame front finish cover.

Preliminary Procedures

1. Flip and fold the rear seat forward.
2. Remove the rear seat floor filler trim cover.

1

Rear Seat Riser Finish Cover Screw

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

2

Rear Seat Riser Finish Cover

3

Rear Seat Riser Finish Cover

Preliminary Procedures

1. Flip and fold the rear seat forward.
2. Remove the rear seat floor filler trim cover.

1

Rear Seat Riser Finish Cover Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

2

Rear Seat Riser Finish Cover (Qty: 2)

3

Rear Seat Riser Finish Cover (Qty: 2)