Application  | Specification  | |
|---|---|---|
Metric  | English  | |
Axle Bracket Retaining Bolts/Nuts  | 25 N·m  | 18 lb ft  | 
Brake Hose Bracket Retaining Bolt  | 12 N·m  | 106 lb in  | 
Control Module to Bracket  | 25 N·m  | 18 lb ft  | 
Inner Tie Rod End Support Clamp  | 25 N·m  | 18 lb ft  | 
Inner Tie Rod End to Steering Gear  | 100 N·m  | 74 lb ft  | 
Inner Tie Rod Jam Nut  | 65 N·m  | 48 lb ft  | 
Lower Ball Joint Pinch Bolt  | 230 N·m  | 169 lb ft  | 
Lower Ball Joint Retaining Bolts  | 110 N·m  | 81 lb ft  | 
Outer Tie Rod End Retaining Bracket Bolts  | 65 N·m  | 48 lb ft  | 
Outer Tie Rod End Retaining Nut to Steering Knuckle  | 55 N·m  | 40 lb ft  | 
Park Brake Cable Bracket Retaining Bolt  | 65 N·m  | 48 lb ft  | 
Rear Wheel Position Sensor  | 4 N·m  | 35 lb in  | 
Rear Wheel Steering Control Module Bracket to Frame Nuts  | 25 N·m  | 18 lb ft  | 
Steering Gear Actuator and Cover Retaining Bolts  | 61 N·m  | 45 lb ft  | 
Steering Gear Motor to the Steering Gear, 4 mm bolts  | 4 N·m  | 35 lb in  | 
Steering Gear Motor to the Steering Gear, 6 mm bolts  | 10 N·m  | 89 lb in  | 
Steering Gear Protection Shield Retaining Bolts  | 180 N·m  | 132 lb ft  | 
Upper Ball Joint Retaining Bolts  | 110 N·m  | 81 lb ft  | 
Upper Ball Joint Retaining Nut  | 200 N·m  | 147 lb ft  | 
Wheel Hub and Bearing Retaining Bolts  | 140 N·m  | 103 lb ft  | 
Wheel Drive Shaft Retaining Nut  | 250 N·m  | 184 lb ft  | 
Yaw Rate Sensor/Lateral Accelerometer Sensor Nuts  | 10 N·m  | 89 lb in  |