Removal Procedure
- Remove the air inlet grille panel. Refer to 
Air Inlet Grille Panel Replacement
.
 
- With two hands release the tabs on each side of the access cover.
 
- Lift up the filter access cover (1).
 
- Remove the filter (1) from the filter housing.
 
- Gently pry out on the filter housing to separate the housing from the sheet metal.
 
- Remove the passenger air filter housing (1).
 
Installation Procedure
- Install the passenger air filter housing (1).
 
- Press the passenger air filter housing until all clips engage into the sheet metal.
 
- Ensure that there is a good seal between the passenger air filter housing and the sheet metal.
 
- Install the filter (1) into the filter housing.
 
- Install the filter access cover (1).
 
- Install the air inlet grille panel. Refer to 
Air Inlet Grille Panel Replacement
.