Removal Procedure
- Remove the fuel injector sight shield. Refer to 
Fuel Injector Sight Shield Replacement
.
 
- Disconnect the positive crankcase ventilation (PCV) tube from the air cleaner duct.
 
- Loosen the air duct clamp at the throttle body.
 
- Loosen the air duct clamp at the mass air flow (MAF)/intake air temperature (IAT) sensor.
 
- Remove the air cleaner duct from the vehicle.
 
Installation Procedure
- Install the air cleaner duct to the vehicle.
 
Notice: Refer to Fastener Notice in the Preface section.
- Tighten the air cleaner duct clamps at the throttle body and the MAF/IAT sensor.
 
Tighten
Tighten the air duct clamps to 3 N·m (27 lb in).
- Connect the PCV tube to the air cleaner duct.
 
- Install the fuel injector sight shield. Refer to 
Fuel Injector Sight Shield Replacement
.