Removal Procedure
- Remove the rear console trim panel. Refer to 
Center Console End Panel Replacement 
 in Instrument Panel, Gages, and Console. 
 
- Remove the arm rest filler. Refer to 
Front Floor Console Armrest Replacement 
 in Instrument
Panel, Gages, and Console .
 
- Remove the 4 screws securing the DVD player to the console base bracket. Refer
to 
Floor Console Bracket Replacement 
 in
Instrument Panel, Gages, and Console.
 
- Slide the DVD player out of the bracket.
 
- Disconnect the electrical connectors.
 
- Remove the screws securing the screen to the DVD player bracket.
 
- Remove the screen.
 
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the screws securing the screen to the DVD player bracket.
 
Tighten
Tighten the screws to 9 N·m (80 lb in).
- Connect the electrical connectors.
 
- Slide the DVD player into the bracket.
 
- Install the 4 screws securing the DVD player to the console base bracket.
Refer to 
Floor Console Bracket Replacement 
 in
Instrument Panel, Gages, and Console.
 
Tighten
Tighten the screws to 9 N·m (80 lb in).
- Install the arm rest filler. Refer to 
Front Floor Console Armrest Replacement 
 in Instrument
Panel, Gages, and Console.
 
- Install the rear console trim panel. Refer to 
Center Console End Panel Replacement 
 in Instrument Panel, Gages, and Console.