GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2005 🢒 SRX 🢒 Brakes 🢒 Antilock Brake System 🢒 Electronic Traction Control Switch Replacement

Removal Procedure

    Object Number: 1250989 Size: SH
  1. Remove the console shift lever bezel. Refer to Console Shift Lever Bezel Replacement in Instrument Panel, Gages, and Console.
  2. Disconnect the traction control electrical connector.
  3. Remove the trim plate.
  4. Remove the two traction control mounting screws (1).
  5. Remove the traction control switch (2).

Installation Procedure
  1. Install the traction control switch (2) to the trim plate.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1250989 Size: SH
  2. Install the two traction control mounting screws (1).

    3. Tighten
    Tighten the two traction control mounting screws to 2 N·m (18 lb in).

  3. Connect the traction control electrical connector.
  4. Install the console shift lever bezel. Refer to Console Shift Lever Bezel Replacement in Instrument Panel, Gages, and Console.