For 1990-2009 cars only
Removal Procedure
- Remove the cross car brace, if necessary. Refer to Cross Vehicle Brace Replacement .
- Clean the fuel injector sight shield at the power steering and engine oil fill cap locations.
- Remove the power steering and engine oil fill caps.
- Lift the sight shield up from the front and pull forward to disengage the rear tab from the bracket.
- Remove the front compartment sight shields, if necessary. Refer to Front Compartment Sight Shields Replacement .
Installation Procedure
- Install the front compartment sight shield, if necessary. Refer to Front Compartment Sight Shields Replacement .
- Align the rear tab with the slot in the rear bracket and push the sight shield inward to engage.
- Push the sight shield down and align the ball studs on the engine with the holes in the sight shield.
- Install the power steering and engine oil fill caps.
- Install the cross car brace, if necessary. Refer to Cross Vehicle Brace Replacement .
