Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Remove the engine sight shield. Refer to Intake Manifold Sight Shield Replacement .
2. Remove the front and rear section of the supercharger inlet duct assembly. Refer to Supercharger Inlet Duct Assembly Replacement .
3. Disconnect the evaporative emission (EVAP) hose from the EVAP canister purge solenoid valve. Refer to Plastic Collar Quick Connect Fitting Service .
4. Disconnect the electrical connector from the EVAP canister purge solenoid valve.

1

EVAP Canister Purge Solenoid Valve Bolt

Tighten
12 N·m (106 lb in)

2

EVAP Canister Purge Solenoid Valve

Tip