| Table 1: | Instrument Panel Module (IPM) Scan Tool Data List | 
| Table 2: | Memory Seat Module (MSM) Scan Tool Data List | 
| Table 3: | Steering Column Lock Control Module (SCLCM) Scan Tool Data List | 
Scan Tool Parameter  | Data List  | Units Displayed  | Typical Data Value  | 
|---|---|---|---|
Turn the Ignition ON, with the Engine OFF  | |||
Battery Voltage Signal  | Load Management  | Volts  | 12.6 V  | 
Column Lock Relay  | Outputs  | Enabled/Disabled  | Enabled  | 
Telescope Forward Switch  | Inputs  | Active/Inactive  | Inactive  | 
Telescope Rearward Switch  | Inputs  | Active/Inactive  | Inactive  | 
Tilt Down Switch  | Inputs  | Active/Inactive  | Inactive  | 
Tilt Up Switch  | Inputs  | Active/Inactive  | Inactive  | 
Scan Tool Parameter  | Data List  | Units Displayed  | Typical Data Value  | 
|---|---|---|---|
Default Telescope Exit Position  | Telescope Sensor  | Volts  | 3.76 V  | 
Default Tilt Exit Position  | Tilt Sensor  | Volts  | 3.76 V  | 
Driver 1 Memorized Position  | Telescope Sensor  | Volts/Counts  | 0.7-3.2 V (45-157 Counts)  | 
Driver 1 Memorized Position  | Tilt Sensor  | Volts/Counts  | 1.6-4.2 V (88-207 Counts)  | 
Driver 2 Memorized Position  | Telescope Sensor  | Volts/Counts  | 0.7-3.2 V (45-157 Counts)  | 
Driver 2 Memorized Position  | Tilt Sensor  | Volts/Counts  | 1.6-4.2 V (88-207 Counts)  | 
Memory 1 Telescope Exit Position  | Telescope Sensor  | Volts  | Varies  | 
Memory 1 Tilt Exit Position  | Tilt Sensor  | Volts  | Varies  | 
Memory 2 Telescope Exit Position  | Telescope Sensor  | Volts  | Varies  | 
Memory 2 Tilt Exit Position  | Tilt Sensor  | Volts  | Varies  | 
Telescope Forward Command  | Telescope Sensor  | On/Off  | Off  | 
Telescope Rearward Command  | Telescope Sensor  | On/Off  | Off  | 
Telescope Sensor  | Telescope Sensor  | Volts/Counts  | 0.7-3.2 V (45-157 Counts)  | 
Telescope Soft Stops Learned  | Telescope Sensor  | Yes/No  | Yes  | 
Tilt Down Command  | Tilt Sensor  | On/Off  | Off  | 
Tilt Sensor  | Tilt Sensor  | Volts/Counts  | 1.6-4.2 V (88-207 Counts)  | 
Tilt Soft Stops Learned  | Tilt Sensor  | Yes/No  | Yes  | 
Tilt Up Command  | Tilt Sensor  | On/Off  | Off  | 
Scan Tool Parameter  | Data List  | Units Displayed  | Typical Data Value  | 
|---|---|---|---|
Column Lock Relay Command  | BCM  | On/Off  | On  | 
Column Lock Relay Signal  | BCM  | On/Off  | On  |