The column is not aligned correctly.

1. Check the following:

•	Check the column alignment.

•	Check the mounting.

•	Check the bearings.

2. Adjust, repair and/or replace as needed.

Refer to Steering Column Replacement .

The joints from the column to the steering gear are loose.

1. Check for correct torque.
2. Replace components as needed.

Refer to Fastener Tightening Specifications .

A lack of grease on the bearings.

1. Inspect the bearings.
2. Lubricate the bearings with lithium grease.

The shaft lock retaining ring is not seated.

1. Inspect the shaft lock retaining ring.
2. Firmly seat the shaft lock retaining ring into the groove on the shaft.

Refer to Steering Column Tilt Head - Off Vehicle .