- Clean the transfer case using solvent and a stiff brush.
 
- Remove the following components from the front output shaft:
 
| 2.1.  | The front output yoke nut | 
 
| 2.3.  | The rubber sealing washer | 
 
| 2.4.  | The front output yoke | 
 
- Remove the following components from the main shaft:
 
| 3.1.  | The rear output yoke nut | 
 
| 3.3.  | The rubber sealing washer | 
 
| 3.4.  | The rear output yoke | 
 
- Remove the speed sensor from the rear bearing retainer.
 
- Remove the four-wheel drive indicator switch from the front case
half.
 
- Remove the rear bearing retainer bolts and the rear bearing retainer
from the rear case half.