For 1990-2009 cars only
Removal Procedure
- Raise the vehicle and suitably support. Refer to Lifting and Jacking the Vehicle in General Information.
- Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
- Unhook cable system at the front intermeadate cable conmector to release cable tension.
- Disconnect right (5) and left (2) rear parking brake cables from the rear equalizer (1).
- Remove both brake cables from their brackets by depressing retaining tabs on the cable housings and pulling the cables out of the brackets.
- Disconnect both parking brake cables (1) from the parking brake levers.
- Remove right and left cable from caliper support brackets by depressing conduit fitting retaining tabs
- Remove the parking brake rear cables.
Installation Procedure
- Install both cables (2), (5) into their brackets by snapping them into place.
- Connect both cables to the equalizer (1).
- Install right and left cables (1) into the caliper support brackets by snapping into place.
- Connect the parking brake cables to the parking brake levers.
- Install the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
- Install intermeadiate cable to front cable connector. Brake pedal must be in full released position.
