Replacement Procedure
- Remove the RH insulator
panel. Refer to 
Instrument Panel Insulator Panel Replacement 
 in Instrument Panel, Gauges  and
Console.
 
- Remove the filter access cover.
 
- Remove the first filter
by pulling the filter tab.
 
- Remove the second filter by pulling the filter tab.
 
- Remove the third filter by pulling the filter tab.
 
Installation Procedure
- Install the first filter
into the HVAC module assembly. 
 
- Use the tab and raise the filter, so that the leading edge catches
on the holding rib inside of the filter case.
 
- Install the second filter in the tab of the first filter.
 
- Slide the second filter into the remaining channels of the first
filter.
 
- Raise the filters, so that the leading edge catches on the holding
rib inside of the filter case.
 
- Install the third filter in the tab of the second filter.
 
- Slide the third filter into the remaining channels of the second
filter.
 
- Fold the second filter tab down and the third filter tab up over
the second.
 
- Install the
filter access cover.
 
- Install the RH insulator panel. Refer to 
Instrument Panel Insulator Panel Replacement 
 in  Instrument Panel, Gauges and Console.