SMU - Revised Front and Rear Ball Joint Stud Nut Tightening Specifications
| Subject: | Revised Front and Rear Ball Joint Stud Nut Tightening Specifications |
| Models: | 2004-2005 Cadillac XLR |
This bulletin is being issued to revise the Front and Rear Ball Joint Stud Nut Tightening Specifications in the Front Suspension and Rear Suspension sub-sections of the Service Manual. Please replace the current information in the Service Manual with the following information.
The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.
Front Suspension | |
|---|---|
Lower Control Arm Ball Joint Stud Nut | First Pass 30 N·m (22 lb ft) |
Final Pass 180 Degrees | |
Upper Control Arm Ball Joint Stud Nut | First Pass 20 N·m (15 lb ft) |
Final Pass 225 Degrees | |
Rear Suspension | |
Lower Control Arm Ball Joint Stud Nut | First Pass 30 N·m (22 lb ft) |
Final Pass 180 Degrees | |
Upper Control Arm Ball Joint Stud Nut | First Pass 20 N·m (15 lb ft) |
Final Pass 195 Degrees | |
