Important: Perform the following procedures when removing the retaining ring and cooler line from the quick connect fitting on the transmission.
Important:
⢠| Do not reuse any of the existing retaining rings that were removed from the existing quick connect fittings. All retaining rings being installed must be new. |
⢠| Ensure the following procedures are performed when installing the new retaining rings onto the fittings. |
Notice: Ensure that the cooler line being installed has a plastic cap on each end that connects to a quick connect fitting. If no plastic cap exists, or the plastic cap is damaged, obtain a new plastic cap and position on to the cooler line prior to the cooler line installation.
Tighten
Tighten the flair nuts to 45 NĀ·m (33 lb ft).