|
|---|
| (1) | Upper
Trim Cover |
| (2) | Lower
Trim Cover |
| (3) | Shift
Lever Assembly |
| (4) | Shift
Lever Screw |
| (5) | Shift
Lever Seal |
| (6) | Flanged
Prevailing Torque Nut |
| (7) | Bearing Retainer |
| (8) | SIR
Coil |
| (9) | Wave
Washer |
| (10) | Retaining
Ring |
| (11) | Shaft Lock Shield Assembly |
| (12) | Turn Signal Cancel Cam Assembly |
| (13) | Upper Bearing Spring |
| (14) | Upper Bearing Inner Race Seat |
| (15) | Inner Race |
| (16) | Pan
Head Tapping Screws |
| (17) | TORX®
Head Screw |
| (18) | Ignition
Lock Cylinder Case |
| (19) | Pan
Head Tapping Screw |
| (20) | Tapping
Screws |
| (21) | Ignition
Switch Assembly |
| (22) | Steering Column Tilt Head Assembly |
| (23) | TORX® Head Screw |
| (24) | Wire Harness Strap |
| (25) | Lock
Bolt Spring |
| (26) | Lock Bolt Assembly |
| (27) | Spring
Guide |
| (28) | Tilt
Spring |
| (29) | Trim
Cover Protector |
| (30) | Trim
Cover Mounting Stud |
| (31) | Tilt
Lever Assembly |
| (32) | Pan
Head Tapping Screws |
| (33) | Pan
Head Tapping Screws |
| (34) | Turn
Signal and Multifunction Switch Assembly |
| (35) | Axial
Position Assurance Connector |
| (36) | Wire
Harness Straps |
| (37) | Lower
Steering Shaft Assembly |
| (38) | Joint Preload Spring |
| (39) | Centering Sphere |
| (40) | Race and Upper Shaft Assembly |
| (41) | Linear Shift Assembly |
| (42) | Shift Lever Clevis |
| (43) | Flat Head 6-Lobed Socket Tapping Screws |
| (44) | Cable Shift Cam Assembly |
| (45) | Ball and Actuator Assembly |
| (46) | Cam Bushing |
| (47) | Hexagon Flange Head Bolts |
| (48) | Oval Head 6-Lobed Socket Tapping Screws |
| (49) | Park Lock Cable Assembly |
| (50) | Gear Shift Lever Assembly Support Bracket |
| (51) | TORX® Head Screws |
| (52) | Pivot Pins |
| (53) | Steering Column Support Assembly |
| (54) | Steering Column Jacket Assembly |
| (55) | Adapter and Bearing Assembly |
| (56) | Steering Column Seal |
| (57) | Automatic Transmission Shift Lock Control |
