Removal Procedure
- Remove the fuel sender assembly. Refer to 
Fuel Sender Assembly Replacement 
  .
 
- Note the position of the
fuel strainer (2) on the fuel sender.
 
- Support the fuel sender assembly with one hand and grasp the strainer
(2) with the other hand.
 
- Pull the strainer off the fuel sender. Discard the strainer after
inspection.
 
- Inspect the strainer. Replace a contaminated strainer and clean
the fuel tank.
 
Installation Procedure
- Install a new fuel strainer
(2) in the same position as noted during disassembly. Push the strainer on
     the bottom   of the fuel  sender until the strainer is fully seated.
 
- Install the fuel sender assembly. Refer to 
Fuel Sender Assembly Replacement 
.