Removal Procedure
- Remove the door trim panel. Refer to 
Door Trim Panel Replacement 
 in Doors.
 
- Remove the mounting screws.
 
- Remove the speaker from the door.
 
- Disconnect the electrical connector from the speaker.
 
Installation Procedure
- Connect the electrical
 connector to the speaker.
 
- Install the speaker to the door.
 
Notice: Refer to Fastener Notice in the Preface section.
- Install the speaker  mounting screws.
 
Tighten
Tighten the speaker mounting screws to 2 N·m (18 lb in).
- Verify component operation.
 
- Install the door trim panel. Refer to 
Door Trim Panel Replacement 
 in Doors.