Removal Procedure
- Remove the assist handle from the door.
 
- Remove the retaining screw from the trim plate.
 
- Remove the escutcheon
 from the trim plate.
 
- Swing the plate down.
 
- Remove the tweeter speaker from the trim plate by rotating in
 order to clear the mounting tabs.
 
- Disconnect the electrical connector.
 
Installation Procedure
- Connect the electrical connector.
 
- Install the tweeter speaker
 to the trim plate by rotating in order to lock the mounting tabs.
 
- Verify component operation.
 
- Swing the trim plate up.
 
- Install the escutcheon to the trim plate.
 
Notice: Refer to Fastener Notice in the Preface section.
- Install the retaining  screw to the trim plate.
 
Tighten
Tighten the trim plate screw to 2 N·m (18 lb in).
- Install the assist handle to the door.