Removal Procedure
- Remove the overhead console (3). Refer to 
Roof Console Replacement .
 
- Remove the display lens and the switch plate (1).
 
- Disconnect the electrical connectors.
 
- Remove the temperature/compass electronic display module (2).
 
Installation Procedure
- Install the temperature/compass electronic display module (2).
 
- Connect the electrical connectors.
 
- Install the display lens and the switch plate (1).
 
- Install the overhead console (3). Refer to 
Roof Console Replacement .
 
- Recalibrate the compass. Refer to 
Control Module References for the programming and setup information.