Did you perform the Exterior Lights System Check?

--

Go to Step 2

Go to Exterior Lights System Check

Determine which turn signal indicator is inoperative.

Is the left turn signal indicator inoperative?

--

Go to Step 3

Go to Step 6

1. Disconnect the instrument cluster.
2. Place the ignition switch in the RUN position.
3. Place the turn signal switch to the side of the inoperative indicator.
4. Use a test lamp J 35616-200 in order to probe the wire of the turn signal indicator at the instrument cluster connector CKT 14 (LT BLU) to ground.

Does the test lamp light?

--

Go to Step 4

Go to Step 5

Repair or replace the instrument cluster as necessary. Refer to Instrument Cluster Replacement in Instrument Cluster, Gauges and Console.

Is the repair complete?

--

Go to Exterior Lights System Check

--

Repair the open in CKT 14 (LT BLU) between the instrument cluster and splice S211.

Is the repair complete?

--

Go to Exterior Lights System Check

--

1. Place the turn signal switch to the right side inoperative indicator.
2. Use a test lamp J 35616-200 in order to probe the wire of the right turn signal indicator at the instrument cluster connector CKT 15 (DK BLU) to ground.

Does the test lamp light?

--

Go to Step 4

Go to Step 7

Repair the open in CKT 15 (DK BLU) between the instrument cluster and splice S212.

Is the repair complete?

--

Go to Exterior Lights System Check

--