Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Washer/Wiper Rear System Check? | -- | Go to Step 2 | |
2 |
Is battery voltage present? | -- | Go to Step 4 | Go to Step 3 |
3 | Use a DMM J 39200 in order to backprobe CKT 92 (PPL) cavity E3 at the front pulse wiper/washer switch C201 connector to ground. Is battery voltage present? | -- | Go to Step 5 | Go to Step 6 |
4 | Replace the front wiper motor and module. Refer to Windshield Wiper System Module Replacement . Is the repair complete? | -- | -- | |
5 | Repair the open in CKT 92 (PPL) from the front pulse wiper/washer switch to the front wiper motor and module. Is the repair complete? | -- | -- | |
6 | Replace the front pulse wiper/washer switch. Refer to Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle or Turn Signal and Multifunction Switch Assembly - Assemble - Off Vehicle . Is the repair complete? | -- | -- |
